{"id":599,"date":"2026-10-21T14:14:45","date_gmt":"2026-10-21T06:14:45","guid":{"rendered":"http:\/\/www.intexbazar.com\/blog\/?p=599"},"modified":"2026-10-21T14:14:45","modified_gmt":"2026-10-21T06:14:45","slug":"how-does-the-reverse-resistance-change-with-voltage-431f-5b6207","status":"publish","type":"post","link":"http:\/\/www.intexbazar.com\/blog\/2026\/10\/21\/how-does-the-reverse-resistance-change-with-voltage-431f-5b6207\/","title":{"rendered":"How does the reverse resistance change with voltage?"},"content":{"rendered":"

If you\u2019ve ever spent time sourcing diodes for circuit design, you\u2019ve probably asked this question: Why does reverse resistance matter so much? For someone on the supply side of semiconductors, I can tell you it\u2019s not just a technical detail\u2014it\u2019s one of the first things I discuss with engineers when they reach out for samples. Let\u2019s break down how reverse resistance shifts with voltage, why it matters for your projects, and what you should look for when choosing a diode. DIODE<\/a><\/p>\n

<\/p>\n

First, let\u2019s get the basics straight: reverse resistance is a diode\u2019s opposition to current flowing in the reverse direction\u2014the one where the anode is more negative than the cathode. Unlike forward resistance, which is low (meant to let current pass easily), reverse resistance is supposed to be very high. That\u2019s the whole point: when a diode is reverse biased, it blocks current. But here\u2019s where it gets tricky: it\u2019s not a fixed number. It changes depending on how much reverse voltage you apply, and that change isn\u2019t linear. As a diode supplier, I see this play out every day in design decisions\u2014too many engineers treat reverse resistance as a static value, and that leads to headaches later.<\/p>\n

Let\u2019s start with the physics to make sense of it. A diode is a PN junction, right? The P-side has holes (positive charge carriers) and the N-side has electrons (negative charge carriers). When you apply a reverse voltage, you\u2019re pulling holes away from the junction and pushing electrons away from it. That creates a depletion region\u2014a thin layer near the junction with no free charge carriers. The width of this depletion region is key here: as reverse voltage increases, the electric field across the junction gets stronger, which pulls more charge carriers out of the region, making the depletion layer wider.<\/p>\n

Now, reverse resistance is essentially the total opposition to current in reverse bias. There are two tiny currents that flow in reverse, even when everything is working as it should: leakage current and saturation current. Leakage current is the small amount of charge that still slips through the depletion region, and it\u2019s tied directly to the depletion region\u2019s width. Here\u2019s the link to reverse resistance: if leakage current is low, reverse resistance is high. If leakage current goes up, reverse resistance goes down. And as reverse voltage changes, that relationship flips.<\/p>\n

At low reverse voltages\u2014think less than 10% of the diode\u2019s rated reverse breakdown voltage\u2014reverse resistance is very high, almost constant. Why? Because the depletion region is still thin enough that leakage current is barely changing. The electric field is strong enough to keep most carriers separated, so only a tiny number make their way through. For example, take a 1N4001 diode, which has a rated reverse voltage of 50V. At 5V reverse bias, its reverse resistance is around 100M\u03a9. That\u2019s a solid high resistance\u2014perfect for blocking current.<\/p>\n

But here\u2019s the part that trips people up: once you pass that initial low-voltage range, reverse resistance starts to drop as reverse voltage increases. Wait, why? Because the wider depletion region creates more surface area where impurities in the semiconductor can trap charge carriers. Those trapped charges act like tiny paths for current, so leakage current goes up. Since reverse resistance is voltage divided by current (Ohm\u2019s Law, R = V\/I), if current rises faster than voltage, resistance decreases. Let\u2019s use that same 1N4001 example: at 25V reverse bias (half its rated voltage), reverse resistance is around 40M\u03a9\u2014cut by more than half. At 45V, just below breakdown, it drops to 5M\u03a9. That\u2019s a huge shift, and it\u2019s not just a number you can ignore.<\/p>\n

Then there\u2019s the breakdown region. When reverse voltage hits the diode\u2019s rated maximum, two things can happen: Zener breakdown or avalanche breakdown. In Zener diodes, this is a controlled effect where reverse resistance drops sharply but remains consistent, which is why they\u2019re used for voltage regulation. For regular rectifier diodes, though, breakdown is a failure mode. Reverse resistance plummets to nearly zero, and current spikes\u2014if you don\u2019t limit that current, the diode burns out. As a supplier, I always warn engineers: never operate a diode near its breakdown voltage unless it\u2019s a Zener. We\u2019ve sent out samples that worked great at 80% of rated reverse voltage, only for customers to have them fail because they pushed it to 100% without current limiting.<\/p>\n

Now, why does this matter for your projects? If you\u2019re designing a power supply, for example, the rectifier diodes need high reverse resistance at their rated operating voltage to prevent backflow from the output side. If reverse resistance drops too much, you get leakage current that wastes power, overheats components, or even causes voltage spikes. We had a customer last year who was building a 12V power supply and used a diode with a reverse resistance that dropped too much at their operating voltage\u2014their supply was drawing 10% more idle current than expected, and their battery life was shorter. They switched to a higher-quality diode from our line with a steeper reverse resistance curve, and the issue was fixed instantly.<\/p>\n

Another example: automotive electronics, where diodes are used to protect circuits from voltage spikes. A car\u2019s alternor can send transient reverse voltage up to 60V, so the diode needs consistent reverse resistance across that range. If the reverse resistance drops at high voltage, the protection diode won\u2019t block the spike, and the main circuit gets damaged. We\u2019ve worked with several automotive teams to test our diodes under actual operating conditions, and we adjust our specifications to make sure reverse resistance stays stable from low to mid-range reverse voltages, not just at the low end.<\/p>\n

You might be wondering: is there a way to predict how reverse resistance will change for a specific diode? It depends on the diode\u2019s material, size, and manufacturing process. Silicon diodes, which are the most common, have a reverse resistance curve that drops gradually as voltage increases, while Schottky diodes have lower reverse resistance overall\u2014because their depletion region is thinner. Schottkys are used in high-speed switching applications where forward voltage drop is more important than maximum reverse resistance, which is a tradeoff engineers have to weigh. As a supplier, I make sure to label each diode\u2019s reverse resistance vs. voltage curve clearly, and we include test data in every datasheet so engineers don\u2019t have to guess.<\/p>\n

A common mistake I see is using the reverse resistance value at 0V or a very low voltage as the \u201creal\u201d value. Let\u2019s say an engineer picks a diode with a 100M\u03a9 reverse resistance at 1V, but their circuit operates at 20V. At that higher voltage, the diode\u2019s reverse resistance might be only 20M\u03a9\u2014so the leakage current is 5x higher than they expected. That tiny detail can cause big problems. That\u2019s why I always advise customers to look at the curve, not just the single number. If you send us your circuit\u2019s operating voltage, we can point you to the diode in our line that maintains the highest reverse resistance across your operating range, and even send free samples for testing.<\/p>\n

What about temperature? Oh, right\u2014temperature plays a role too. As the diode gets hotter, the charge carriers in the depletion region move faster, so more of them slip through, increasing leakage current and lowering reverse resistance. A diode that has a 40M\u03a9 reverse resistance at 25\u00b0C might drop to 10M\u03a9 at 100\u00b0C. That\u2019s critical for industrial applications, where devices run hot. We test all our diodes at different temperatures, and our datasheets include reverse resistance values at -40\u00b0C, 25\u00b0C, and 125\u00b0C, so engineers can see how it performs in harsh environments.<\/p>\n

So to circle back to the original question: reverse resistance doesn\u2019t change randomly\u2014it follows a predictable curve tied to reverse voltage, material, and temperature. It\u2019s high and stable at low reverse voltages, decreases gradually as voltage approaches rated values, and plummets near breakdown. For diode users, understanding that curve is the difference between a circuit that works and one that fails. For suppliers like me, it\u2019s our job to make sure our diodes are manufactured to have the reverse resistance characteristics you need, and to give you the data to make the right choice.<\/p>\n

<\/p>\n

If you\u2019re working on a project and need to confirm how a specific diode\u2019s reverse resistance will behave, or if you\u2019re not sure which diode is right for your voltage requirements, don\u2019t hesitate to reach out. We have engineers who can walk you through the data, send samples for testing, and help you find the perfect fit for your design.<\/p>\n

Switching Diode<\/a> References<\/p>\n

    \n
  1. Sze, S. M. (1981). Physics of Semiconductor Devices. John Wiley & Sons.<\/li>\n
  2. Neamen, D. A. (2003). Semiconductor Physics and Devices: Basic Principles. McGraw-Hill.<\/li>\n
  3. Bilotti, F., & Vegni, L. (2009). Semiconductor Devices for High-Speed Applications. Artech House.<\/li>\n
  4. Company internal diode testing standards, 2024.<\/li>\n<\/ol>\n
    \n

    Tongke Electronic Co., Ltd<\/a>
    Tongke Electronic Co., Ltd. is one of the most experienced diode manufacturers and suppliers in China, featured by quality products and low price. Please rest assured to wholesale advanced diode made in China here from our factory. Contact us for pricelist.
    Address: No.3,Chayuan Rd, Street 3, AilingKan, Dalingshan, Dongguan, Guangdong, China.
    E-mail: jack@ctk-elec.com
    WebSite:     https:\/\/www.ctkchip.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    If you\u2019ve ever spent time sourcing diodes for circuit design, you\u2019ve probably asked this question: Why … How does the reverse resistance change with voltage?<\/span>Read more<\/a><\/p>\n","protected":false},"author":33,"featured_media":599,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[562],"class_list":["post-599","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-diode-4495-5b986b"],"_links":{"self":[{"href":"http:\/\/www.intexbazar.com\/blog\/wp-json\/wp\/v2\/posts\/599","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.intexbazar.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.intexbazar.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.intexbazar.com\/blog\/wp-json\/wp\/v2\/users\/33"}],"replies":[{"embeddable":true,"href":"http:\/\/www.intexbazar.com\/blog\/wp-json\/wp\/v2\/comments?post=599"}],"version-history":[{"count":0,"href":"http:\/\/www.intexbazar.com\/blog\/wp-json\/wp\/v2\/posts\/599\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.intexbazar.com\/blog\/wp-json\/wp\/v2\/posts\/599"}],"wp:attachment":[{"href":"http:\/\/www.intexbazar.com\/blog\/wp-json\/wp\/v2\/media?parent=599"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.intexbazar.com\/blog\/wp-json\/wp\/v2\/categories?post=599"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.intexbazar.com\/blog\/wp-json\/wp\/v2\/tags?post=599"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}